Adapter Builder

Pick the two ends, set the fit and shape, and check the preview. Every part is printed upright, larger end on the bed. Matt reviews every request before anything is printed.

Ends

End A

End B

Fit (per end)

End A clearance, diametral (mm). Socket bore = D + c, spigot OD = D − c

End A grip length (mm, 0 = table/default)

End B clearance, diametral (mm)

End B grip length (mm, 0 = table/default)

Shape

Wall (mm, 2.5 minimum)

Transition angle from vertical (45° max, no supports)

Neck length (mm)

Lead-in chamfer at mouths (mm)

Fillet radius on cosmetic outside corners (mm, 0 = off; clamped per corner, mating faces stay sharp)

Bed-edge chamfer, 45° (mm, socket end on the bed only)

Grip collar Collar height (mm)

Collar proud (mm)

Grip upgrade

Display

Adapter color Show mating hose/port (ghost) Pull mating parts apart (mm)

Cross-section (half cut) Show fuzzy-skin zones Fuzzy-skin texture (preview only, not exported)

Adapter Builder

Ends

Fit (per end)

Shape

Display

Result